Brief introduction of cutting positioning control

  • Detail

Introduction to printing cutting positioning control

piv5500 is a cutting length controller, which is used in combination with ct5000. For example, PIV (front infinite variable) control equipment used in plate cutting machine and label punching machine equipment is used to perform the following two control functions

match the PIV with the specified cut length (repeat length). The deviation signal from ct5500 is used to control the planetary gear (DIF)

* p the operation is convenient Labor saving iv: front infinite variable (non stage transmission)

piv-5500 consists of the following equipment

cutmatic ct5000


encoder (measuring the length of coil feedback)

encoder (standard signal)

scanning head

junction box

correction electromotor (for diff control)

correction motor (for PIV control)

since China and ASEAN started the free trade area negotiation in 2001 * when the cutmatic ct5000 is used together with piv5500, its category model becomes ct5000

piv5500 characteristic coil electronic tensile machine speed range 5m/s and above

the accuracy is within 0.1mm (excluding errors due to mechanical accuracy)

the cutting length can be set during the idle period to minimize the paper loss

also greatly simplifies the work of the operator

cutting errors due to tension fluctuation during operation will be automatically compensated

simple operation

can be installed on various related machines

it is equipped with an alarm circuit (contact output), which outputs a warning when an additional error occurs

piv5500 display system

piv5500 display system includes a pitch setting switch. Due to the large number of fatigue testing machines sold on the market, there is a manual/automatic switch, a manual motor operation switch,

a repetition length setting switch, a repetition length confirmation switch, a measurement pitch display, a setting repetition display and a deviation display (LED)

source: printed in Guangzhou

Copyright © 2011 JIN SHI